Guitar players often neglect cable management. But learning how to wrap and store your cables can lengthen their lifespan and clean up your practice space. If you want to get rid of all those tangled cables strewn around your guitar, this guide will help you do it.
Taking the extra time to properly wrap and store can seem like an unnecessary burden. If you’ve just finished a long practice session or walked off the stage at a gig, the last thing you want to do is start wrapping cables!
However, throwing your cables around without wrapping them properly can cause them to fray, split, or short out while you’re playing. Once you find the best cables around, it’s important to take care of them! These techniques to save your cables don’t take any extra time, but will help you preserve your pieces of equipment and keep them performing at their best for longer.
How To Organize Messy Cords At Home
If you’re like most guitar players, chances are you don’t put much thought into how you wrap up your cables. Unfortunately, poor wrapping techniques abound — some guitarists wrap cables around their arm, while others ball them up or wrap it around their wrist. Over time all of these these strategies can kink the cable and damage the interior.
To keep your cable safe when you wrap it, use the “roadie wrap” technique. This strategy eliminates any kinks along the cable’s length and makes it easy to unroll as well.
Before you roll up your cable, shake it out. Check that there aren’t any kinks or twists and make sure that the cable isn’t caught on any other object. If you have the space, lie the cable out flat to provide a neat feed as you begin to twist.
Studio Cable Management Ideas That Will Quickly Organize Your Space
Then, take one end of the cable between your fingers; place your other hand along the cable about one foot down. It doesn’t matter which hand you use for each position — just pick whichever is most comfortable!
Hold your two hands even with each other, about shoulder-width apart. Take your hand that’s along the length of the cable and use your thumb and index finger to twist it away from you. Then, bring your two hands together to form a loop of cable. Tuck the loop into your hand that holds the end of the cable and repeat.
Once you’ve got the motion down, you can use this technique to wrap the length of the cable. Just make sure to alternate which way you twist each time — if you twisted away from your body last time, twist towards yourself the next time and vice versa.
The Correct Way To Wrap Your Cables
To create a loop without kinking the cable, you’ll need to bring your hands together in opposite directions as well. This means that the end of the cable will face towards you after one loop and away from you the next.
While this might sound a bit complicated, the process is pretty intuitive after a little bit of practice. The cable itself will “guide” you towards the correct motion — trying to loop it the wrong way will build up tension and may cause it to unravel spontaneously.
While it’s not an exact science, holding your hands shoulder-width apart tends to produce the best loop length. Of course, you can adjust the size as you want for larger or smaller coils. Just make sure not to go too small; the tighter loops may place stress on the cable! If you’re in doubt, large loops will keep the cable more relaxed and prevent any tension from building up.
Top 9 Tips For Wire & Cord Management At Work
To unravel a cable that’s been roadie wrapped, just grab one end and pull apart the different loops. The cable should come apart on its own, without too much effort. Shake it out before you plug it in to eliminate any stubborn twists.
Though it may seem obvious, it’s important to reiterate: don’t try to wrap up a coiled guitar cable! Most coiled cables are fairly short when they’re not extended anyway; using the roadie wrap technique on a coiled cable risks damaging it or destroying the coiled pattern.
To transport a coiled cable, make sure it’s fully rolled up without any kinks or twists. Once you’ve straightened everything out, just arrange the coils into a circle and throw it in your case or bag. As long as you keep it clear of any objects that could catch it and don’t place heavy objects over it, the cable should be fine.
How To Choose Audio Cables For Your Electric Guitars
Once you’ve got your cables wrapped up properly, you’ll still need to organize them or they may unravel. You can use a couple different techniques depending on your space and budget.
Velcro ties are the quickest way to prevent your cables from coming apart. Just take some mini strips of velcro and fasten them around the coiled cable. Many cables come packaged with some sort of fastener, though you can also find them at guitar or hardware stores.
Even if you have enough velcro strips, getting your cables in the air is always a good idea. On the floor, it’s easy to forget where they are — or worse, step on and damage them. A simple set of hooks can keep your cables safe and neatly organized.
Guitar Cables: Coiled Vs. Straight
To avoid drilling holes in your wall, just find some space on a desk or hang them from a ledge. Even guitar stands can hold your cables in a pinch! If you have enough space, though, it’s a good idea to keep your cables organized by length — you’ll be able to grab the perfect one for every job.
When you’re on stage, many of the standard rules about cable management fly out the window. It can be easy to get caught up in the energy and excitement of performing! However, don’t neglect your cables before, during, or after your set.
When you set up your cables, make sure that there aren’t any kinks or twists along their length. You should also try to keep as many of your cables coiled as possible; only unfurl enough length to get between your amp, pedals, and guitar. If you’re looking for recommendations on other gear, check our our articles on the best guitar pedals and the best amps (both tube amps and solid-state models)!
Boss Wl 50 Review
Once you have your setup organized, you can go ahead and play as you normally would! Just make sure to feed your cable through the loop of your guitar strap. This technique keeps the cable off of the floor and prevents you or your bandmates from stepping on it during the heat of the moment.
Stepping on a cable, even by accident, can cause irreparable harm. Depending on your axe, stepping on the connection could tear the jack out entirely, ruining part of the hardware and potentially damaging the electronics of your instrument. With such an easy fix, there’s no excuse not to take proper care of your cables on stage!
Though cable management is far from the sexiest part of a guitar player’s life, it’s still an important skill to know. Wrap your cables using the roadie wrap technique and keep them out of harm’s way to ensure that they’re always ready when you need them!
An Easy Way To Organize Your Cables And Prevent Them From Getting Tangled
Jen is a guitarist and singer-songwriter who spends much of her time on the road and has lived in 13 cities across 4 continents. She picked up her first guitar at the age of 6 and learned to play by ear shortly after. She received her formal music education at the Berklee College of Music, and currently plays for a few bands in her free time. She has an uncanny ability to improvise creative melodies and harmonies. Her early influences include blues, jazz and rock.
We may link to products if we deem helpful to the reader. Some of these links are affiliate links meaning we may earn commissions on purchases. As an Amazon Associate we earn from qualifying purchases. Guitar pedalboards are a great way to keep your pedals organized and your cables tidy. But if you don’t take care to secure your pedalboard cables, they can become a tangled mess. Here are a few tips to help you keep your pedalboard cables under control: 1. Use zip ties or velcro straps to secure your cables to the pedalboard. This will keep them from moving around and getting tangled. 2. Use shorter cables where possible. This will minimize the amount of cable that you have to deal with. 3. Use right-angle plugs on your pedals. This will help to keep your cables from sticking out and getting in the way. 4. Use rubber tubing or heat shrink tubing to tidy up your cables. This will give your pedalboard a clean and professional look. 5. Label your cables. This will help you to keep track of which cable goes to which pedal. By following these tips, you can keep your pedalboard cables under control and your pedalboard looking great.
A guitar cable can be strained in the middle of a live show. In addition to the Safety Carabiner Set we used when attaching the cable loom to the pedalboard, Custom Boards also provides a
0 Response to "How To Keep Guitar Cables From Tangling"
Posting Komentar